YOU ALSO NEED A SADDLE PAD UNDER THE SADDLE - 12MM TO 14MM THICK
Contact us with your requirements and measurements.
We will need:
Photos of your horse - side on and front and rear
Your hip measurement
Your thigh measurement at the widest part
Your inside leg measurement
You can choose the style, materials, tooling, etc. to custom design your saddle. You can choose different styles of tooling - Flower Tooling or Basketweave, - or choose to have no tooling at all. It does not alter the sale price.
These saddles never need re-flocking, as the shock absorbing material is Neoprene. The panels are very wide to spread the weight over a huge area - much greater than an 'English' saddle and the gullet width is a full 4 fingers, front to back, (the screws are NOT the width of the gullet at that point!) to ensure that there is no pressure on the spine
Many English saddle have gullets that get narrower towards the cantle end of the saddle. WHY? - a horse's spine does not get narrower and this is NOT correct saddle design, causing pressure on the spinal processes and eventually, Kissing Spine and Roach Back problems
Look at these 2 English saddles. The one on the left has a gullet that is too narrow for every horse on the planet, but the one on the right, although the gullet is a decent width, it still narrows towards the cantle end.